Tips From the Moving Business Pros: The Best Ways To Move a Pinball Machine



With pinball making a substantial resurgence across the nation, Gentle Giant wishes to make certain that these classic, stunning machines stay damage-free while being carried. Oh, and we want individuals moving them to be safe, too.

Initially glance, pinball devices can appear frightening to move because of their fragility, size, and weight. Thankfully, our competent Giants have a couple of tricks up their sleeves to ensure your pinball is moved with ease.
Folding Down the Headbox

The bulk of modern pinballs (made in the last 20 years approximately) have a hinge system which allows the headbox to be folded down. Early pinball machines had their headboxes bolted on, utilizing either 2 or four bolts. All Electro-Mechanical pinballs use this system, in addition to the early Solid State devices.

Later on makers have hinges and use a locking system to keep the headbox upright. There might also be two bolts inside as included security, in case the latch is broken or inadvertently un-latched.
Electro-Mechanical Pinballs

For Electro-Mechanical pinball makers, you need to eliminate the headbox rear gain access to panel to gain access to the bolts and plugs inside. Normally this panel has a lock on it to keep it in location, but in time the secret might have been lost. On a regular basis, there is a screw keeping this panel in location.

As soon as inside, eliminate the bolts and disconnect the big connectors that have electrical wiring decreasing into the machine. You may wish to identify these connectors to put them back in the right area, however they should be different sizes, making it tough to plug back improperly.

You can now get rid of the headbox completely, or fold the headbox down onto the playfield glass. Ensure you utilize some foam, heavy cardboard, or blankets to secure the headbox from rubbing on the cabinet. Foam is best, as it will help keep the back glass in place.
Early Strong State Pinballs

For early Strong State Pinballs, you will have to remove the back glass. There is a lock situated on the headbox in among three places: the left-hand side at the top, right-hand side on top or on top of the headbox in the center.

As soon as opened, remove the back glass by lifting it up using the lift channel (at the bottom of the glass), then pull it out from the bottom.

Then, open the back box lamp panel by lifting the latch situated on either the left-hand side or right-hand side. The panel can now swing out to you, and offer you access to the circuit boards, plugs, and the bolts. Some Gottlieb pinballs need you to lift up the lamp panel in order to swing it open.

Now that you are inside, you can eliminate the bolts, and any plugs that have wires decreasing into the maker. You may want to label these plugs to put them back in the best area. You might not have to remove the plugs, as the electrical wiring must be long enough to permit the headbox to be folded down.

At this point, you can lock up the lamp panel and replace the back glass.
Modern Strong State Pinballs

For Data East, Sega, and Stern Modern pinballs, there is a turnable lock system situated at the back of the headbox. Using the supplied key, turn the latch 90 ° counter-clockwise.

For Williams, Bally, and Gottlieb, you can quickly unlatch the back box at the back of the maker. This is a basic setup and requires no tools.

If you can now fold down the head box onto the cabinet, you're done. Ensure you utilize some foam, heavy cardboard, or blankets to secure the headbox from rubbing on the cabinet. Foam is best, as it will also help keep the back glass in place.

You require to get within if you can not fold the head box down. There is a lock situated at the top of the back glass in the center. Use the supplied key to unlock, and eliminate the back glass by raising it up from the bottom, then pulling it out from the bottom.

Next, you will need to eliminate the screen panel. (Some more recent Williams and Bally pinballs do not have a different amp panel, it is part of the back glass panel. And later on Sega and Stern pinballs utilize a fluorescent tube for the back glass lighting).

Get rid of the 2 bolts, put the back box back together, and fold down the head box onto the cabinet. Make sure you use some foam, heavy cardboard, or blankets to protect the headbox from rubbing on the cabinet. Foam is best, as it will also help keep the back glass in place.
Eliminating the Legs.

Pinball Device legs are kept in location by 8 bolts. They will be either 5/8 inch or 9/16 inch heads. The modern-day pinballs have captive nuts or threaded plates inside for the bolts to screw into. These bolts can be gotten rid of, and the legs will come off.

But these captive nuts and threaded plates can be damaged, and making use of extra nuts may have been required. If this holds true, you will have to open the front door of the pinball, slide out the playfield glass, and raise up the playfield.

With the front door (coin door) open, move the lock down bar lock throughout and get rid of the lock down bar. Then move out the playfield glass, and put in a safe location. Next, raise the playfield by positioning your hand where the ball drains pipes, and raise the playfield up.

You need to now have access to any nuts that might have been utilized. As soon as any nuts have actually been gotten rid of, change the playfield glass and lock down bar, and lock the front door.

Make certain to mark or keep in mind which legs are for the front and back, as they will be changed in a different way to suit.
Loading the Pinball.

You are now ready to transport your pinball machine. Before you load it, make sure you remove the pinballs so they do not bounce around throughout transportation.

It might be much easier to get rid of the legs simply prior to filling the maker if you are moving the pinball utilizing a van or SUV. Get a pal to have and assist among you supporting the pinball, while the other eliminates the front legs. Slide the device in, and after that remove the back legs. It is much easier to load the get more info machine front.

Make sure you strap the pinball in, as you do not want it moving if you have to stop suddenly!

For Electro-Mechanical pinball machines, you require to get rid of the headbox rear gain access to panel to get access to the bolts and plugs within. (Some more recent Williams and Bally pinballs do not have a different amp panel, it is part of the back glass panel. And later on Sega and Stern pinballs utilize a fluorescent tube for the back glass lighting).

If you are moving the pinball utilizing weblink a van or SUV, it may be simpler to remove the legs just prior to loading the maker. Get a good friend to my review here have and assist one of you supporting the pinball, while the other eliminates the front legs.

Leave a Reply

Your email address will not be published. Required fields are marked *